Skip to contentNirvana EnergyCall(602) 704-4648Build your systemGet a System Quote

Solar maintenance and retrofit

Solar maintenance that gets the array producing again

Cleaning, checks, panel replacement and equipment upgrades for the solar system you already own, whoever put it in.

4.9 stars from 13 Google reviews · ROC 357597, CR-11 Electrical

Technician working on a rooftop solar array

Nirvana Energy maintains and upgrades existing solar systems across Arizona. A visit can include panel cleaning, a production and safety check, replacement of damaged panels, inverter swaps, and retrofits that add battery storage to an older system. We work on systems we did not install, and every repair is done by our own licensed crew.

Last updated · Reviewed by Nirvana Energy, ROC 357597

Solar panels installed on a clay tile roof under a clear Arizona sky

A maintenance visit

What we look at on the roof and at the wall

Arizona is hard on solar equipment. Heat, dust and monsoon wind all take their share, usually quietly.

  • Panel cleaning. Dust and grime off the glass with methods that do not void the panel warranty.
  • Visual inspection. Cracked glass, hot spots, loose racking and rodent damage under the array.
  • Electrical check. Connectors, conduit, disconnects and breakers, tested and tightened.
  • Inverter and monitoring. Error logs read, firmware and app setup checked, production compared with what the array should make.
  • A written summary. What we found, what we fixed, and anything that needs a decision from you.

Retrofit and upgrades

Give an older system a second life

Many Arizona systems were installed before home batteries were common. The panels are often fine; the electronics around them are what need attention.

Inverter swaps

Replacing a failed or outdated inverter, often with one that is ready for storage.

Panel replacement

Swapping damaged panels and matching them to the rest of the string.

Adding storage

Retrofitting a battery so your existing panels can carry you through an outage.

Expansion

More panels for a bigger household, an EV or a new mini split.

Inverter stack mounted on an interior wall

Courteous, friendly and professional

4.9 stars from 13 Google reviews
Nirvana came out to do a simple cleaning for the solar panels on my house! They were very courteous, friendly, and professional! I could tell they were experts in the industry from our conversation and asked them to do a routine check on my solar system while they were there.
5 of 5 Matt Moffitt Google

How do I know my solar system needs maintenance?

Watch the bill and the monitoring app. If your utility bill creeps back up with no change in how you live, the app shows faults or stops reporting, or you can see cracked glass, sagging racking or a film of dust from the street, the system needs a visit. Each of these quietly cuts production.

  1. Lower bills stopped

    Your utility bill crept back up without a change in how you live.

  2. An app full of errors

    The monitoring app shows faults, or stopped reporting at all.

  3. Visible damage

    Cracked glass, sagging racking or chewed wiring under the array.

  4. A dusty season

    A haboob or a dry spring left a film you can see from the street.

Planning to add storage while we are there? Read about home battery backup. Adding a battery or a bigger array sometimes needs a panel upgrade first, and an older array can be repurposed for an off-grid solar system on a cabin or shop.

How much output dust takes from solar panels

NREL puts soiling losses at 1 to 2% where it rains regularly; semi-arid sites can lose more than 15% at their dustiest point while annual losses typically stay at 5% or less. Desert dust storms can cut output by up to 80% until panels are cleaned.

  • Regular rainfall, over a year1 to 2%
  • Semi-arid climate, over a year5% or less
  • Semi-arid, at the dustiest pointover 15%
  • Middle East, after dust stormsup to 80%
Source: NREL: PV soiling losses (2022).

What happens on a solar maintenance visit?

A visit starts with the numbers and ends with a written summary. We compare what the array should produce with what it does, clean and inspect the panels, test the electrical side and the inverter, fix what we can on the spot and write down anything that needs your decision.

  1. Read the data

    Monitoring history and inverter error logs, compared with what the array should make.

  2. Clean and inspect

    Panels cleaned; glass, racking and wiring under the array checked for damage.

  3. Test the electrical

    Connectors, conduit, disconnects and breakers tested and tightened.

  4. Summarize

    What we found, what we fixed, and options such as an inverter swap or adding a battery.

What affects the cost of solar maintenance?

Most of the cost is access and what the check turns up. A ground-mount array is quicker to clean than a steep roof, a larger array takes longer, and a failed panel, an inverter swap or a battery retrofit is priced separately once we know what the system needs.

  • Array sizeMore panels take longer to clean and inspect.
  • AccessRoof pitch, height and tile versus a ground mount you can walk up to.
  • What the check findsDamaged panels, loose connections or rodent damage under the array.
  • Inverter conditionA failed or outdated inverter is a replacement, often with one ready for storage.
  • UpgradesAdding a battery or expanding the array for an EV or a mini split.

See the statewide service area

Solar care guides

Keep going: browse every Arizona solar and battery guide, see all our services or look at systems we have installed.

Questions

Maintenance and retrofit questions

How often should solar panels be cleaned in Arizona?

Dust, pollen and monsoon grime build up faster here than in most of the country. Many owners book a cleaning and a system check once or twice a year, and after a dust storm if production drops noticeably.

My production dropped. Is it the panels or the inverter?

It can be either, or the wiring between them. A system check compares what the array should produce with what it does, then narrows it down: soiling, a failed panel, a tripped breaker, a loose connection or an inverter fault.

Can you work on a system another company installed?

Yes. A lot of our maintenance and retrofit work is on systems we did not install, including ones whose original installer is no longer around.

Can I add a battery to my existing solar?

Usually. Depending on your inverter, a battery can be added directly or with an inverter upgrade. We check the existing equipment first and tell you which path fits.

Free consultation, Arizona statewide

Get your array checked

Free consultation anywhere in Arizona. Tell us what the system is doing, or not doing, and a licensed electrician will tell you what it needs. We install anywhere in Arizona, from the Valley to remote land: see our Arizona service area.

4.9 stars from 13 Google reviews. Licensed and bonded in Arizona, ROC 357597.

Call (602) 704-4648

Tell us what you want to power

Open Monday to Friday, 9 AM to 5 PM. The consultation is free anywhere in Arizona.

How we handle what you send: our privacy policy and terms and conditions.

CallGet a System Quote